Operation
Product manual 2CKA001473B5023
197
Scenes (basic version)
With control element "Scene" the user can start so-called scenes. Several actions can be
combined in a scene so that the user can create a certain light atmosphere with only one press
of the button for example (several dimming actions).
Control element Status Function
Scene (List)
Scene can be called
up:
The control element "Scene (List)" has a pop-up
button for calling up a list with different scenes.
The list closes automatically after a few seconds
if no selection has been made.
The scene must be selected in the list. The
scene is then started via the push-button.
Notice
The scene to be called up must be allocated
correspondingly in the commissioning software
of the IP touch.
Scene selection>
Scene is running:
To Next Page
Loading...
