NoteAction
xx1400001127
Foundry Plus:
Apply rust preventive on the highlighted areas.
5
CAUTION
The parallel arm system weighs 125 kg.
All lifting accessories used must be sized accord-
ingly!
6
Art. no. is specified in Required
equipment on page 271.
Fit the lifting accessory, parallel arm.7
Art. no. is specified in Required
equipment on page 271
Lift the parallel arm onto the workbench where the
lower arm is placed.
8
Adjust the lower arm in a way that both holes are
parallel.
9
Use a level.
xx1000001380
Apply some grease in the holes in the lower arm
(thick blue arrows).
Note
Do not put grease on the surfaces for the VK covers
(thin red arrow)!
10
Continues on next page
276 Product manual - IRB 760
3HAC039838-001 Revision: M
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.4.9 Replacement of parallel arm
Continued
To Next Page
Loading...
