NoteAction
xx0200000220
If required apply two M8 screws in the holes
shown in the figure, and press out the
gearbox.
8
A: M8 holes for pressing out the gearbox
xx1000001412
Remove gearbox axis 6 carefully without
damaging pinion or gear.
9
Continues on next page
344 Product manual - IRB 760
3HAC039838-001 Revision: M
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.7.3 Replacing gearbox axis 6
Continued
To Next Page
Loading...
