NoteAction
xx1000001411
M10x50 quality 12.9 Gleitmo (18 pcs)
Tightening torque:
• 65 Nm
Secure the gearbox with its attachment
screws and washers.
Reused screws may be used, providing they
are lubricated as detailed in section Screw
joints on page 385 before fitting.
6
See section
• Replacing the turning disk on
page 186
Refit the turning disk.7
See section
• See section Performing a leak-
down test on page 146.
Perform a leak-down test.8
See section
• Changing oil, gearbox axis 6 on
page 133
Refill the gearbox with oil.9
xx1000001410
Refit the calibration plate.10
Continues on next page
Product manual - IRB 760 347
3HAC039838-001 Revision: M
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.7.3 Replacing gearbox axis 6
Continued
To Next Page
Loading...
