ABB LGR GLA351 Series - Standard Components; Optional Components

USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
14
Standard Components
This section describes the analyzer components. Verify that each of the system
components has arrived before installation.
Basic free-flow system:
 GLA351 Series analyzer
 Analyzer power cord
 User Guide (this document)
 USB flash drive
 Serial port connection cable (null modem type)
 Exhaust muffler
Applicable for the GLA351-CCIA3
 External Pump System
o External pump (ACC-DP3H)
o Pump power cord
 Pretreatment box with five Teflon connecting tubes:
o Two 6’ x 1/4”
o Two 6’ x 3/8”
o One 3’ x 1/4”
Optional Components
Available on select analyzers.
 External Pump System (includes connection kit and power cord); Options include:
o 3-head diaphragm vacuum pump (ACC-DP3H)
o 4-head diaphragm vacuum pump (ACC-DP4H)
o 3-head diaphragm vacuum pump- Europe only (ACC-DP20)
o Dry Scroll Vacuum Pump (ACC-DS10)
 Multiport Inlet Unit (MIU-16 or MIU-8)
o Power cable
o 25-pin connection cable for control signal
 Batch Injection System (OPT-BATCH-INJECTION)
o Injection port to provide capability for discrete sample measurements via
syringe injection. Accessories include:
 Syringe injection port
 140 mL syringe
 Centering needle
 Septa (box of 50)
 Septum puller
 External Dynamic Dilution System (EDDS)
o Power cable
o BNC Control Cable
o ¼” x 6’ Teflon connection tube with Swagelok tee connector