USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
Laser Hazards
The analyzer is a Class 1 laser product that complies with:
21 CFR 1040.10 and 1040.11
EN 60825-1:2014
The laser is classified as a Class IIIb when exposed.
Only trained service personnel are authorized to open the housing or
service the laser.
Using this analyzer in a manner not specified by ABB-LGR may result in
damage to the analyzer and render it unsafe to operate.
Only authorized persons may open the analyzer cover or perform internal
maintenance. Contact ABB-LGR for maintenance instructions and
maintenance kits. Make sure the analyzer is unplugged before working
with the internal components. Failure to do so may result in damage to
the analyzer and electric shock.
Safety Provisions for a Chemical Spill
Follow these precautions when dealing with all chemicals:
Keep all chemical containers away from heat, sparks, and open flames.
Use only on grounded equipment and with non-sparking tools.
Store in a cool, dry, and well-ventilated place, away from incompatible materials.
If a spill occurs:
Make sure all handling equipment is electrically grounded.
Mop or wipe up, and then place all chemical-soaked items in containers approved
by the US Department of Transportation (DOT) or the appropriate local regulatory
agency.
To Next Page
Loading...
Need help?
General
