ABB LGR GLA351 Series - The Auto Launch Screen

USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
35
The Auto Launch Screen
The Auto Launch and Maintenance settings are available when you click the Service button
on the
Launch Service screen. From this interface, you can:
 Change the auto launch delay timing.
 Transfer files from the internal hard drive to an external storage device connected
via USB by clicking Files.
 Restore the analyzer’s factory settings by clickingRestore.
Figure 23 shows the
Auto Launch screen for the GLA351-N2OCM.
Figure 23: Auto Launch Screen (GLA351-N2OCM)