USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
Exhaust ports:
The
Internal Pump Exhaust
port is located on the back panel of the analyzer. It can
either be connected to the provided muffler (Figure 12) to expel exhaust into the
room air, or the exhaust can be routed to the facility ventilation system using ¼”
tubing.
In optional Fast-Flow mode, the exhaust is located on the external pump. It can
either be connected to the provided muffler to expel exhaust into the room air, or
the exhaust can be routed to the facility ventilation system.
Figure 12: Exhaust Muffler
To Next Page
Loading...
