ABB LGR GLA351 Series User Manual

USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
39
Display – Toggles through the four
Main Panel display formats:

Numeric Display – Default display. Displays the numeric readout of the last
measurement. (Figure 28)

Alarm Status Display – shows the operational status of the analyzer. (Figure 29)

Spectrum Display – Displays the raw and fitted spectral scans.
(Figure 30)

Time Chart Display – Displays the concentration over time. (Figure 31)
Rate – Adjusts the rate at which data is written to the log file. (Figure 32)
Parameter Window – Displays the:
 Time – Current time
 Data File – Current filename to log data
 Gas Temperature – Temperature in Cell (Celsius - °C)
 Gas Pressure – Pressure in Cell (Torr)
 Laser A τ – Laser A ring-down time (micro-seconds -µs)
 Laser B τ – Laser B ring-down time (micro-seconds - µs)
o Only applicable for two laser systems
 MIU– Multiport Inlet Unit
 Rate – Sampling Frequency
 Disk Space – Remaining hard-drive space
Files – Allows easy transfer of files onto USB storage devices.
Setup – Accesses additional configuration and service menus.
Exit – Exits the application and shuts down the analyzer.

ABB LGR GLA351 Series Specifications

General

Brand	ABB
Model	LGR GLA351 Series
Category	Measuring Instruments
Language	English