USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
The
Plot Frequency
radio buttons allow you to select between manually or automatically
plotting the data. (Figure 32)
To adjust the frequency:
1. Click theRate button (clock icon) on the
User Interface Control Bar.
(Figure 27)
The
Data Rate Control Adjustment
panel appears. (Figure 32)
2. Click thePlot on Demand radio button to manually plot the data.
a. When selected, the
Refresh Plot
button appears on the
Main Panel
display.
WhenRefresh Plot button is selected, (Figure 31), current data is added to
the
Main Panel
display.
3. Click thePlot every Nth fit radio button to automatically set the rate at which the
data is updated on the
Main Panel
display.
a. For example, if you set the value to 5, a data point will be saved every 5
seconds.
4. Click Save.
The analyzer restarts sampling at whatever rate was set last.
To Next Page
Loading...
