ABB LGR GLA351 Series - Page 89

USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
89
6. The
Network Connections screen confirms that the iOS device is connected to the
router. (Figure 73)
Figure 73: Router Connection Confirmation Screen
7. Select the network to check the IP address (192.168.100.100 or 192.168.100.101) of
the device as shown in Figure 74.
a. Wireless devices can compete for dynamic addresses. If the 192.168.100.100
address does not connect, then use 192.168.100.101.
8. Record the IP address of the iOS device because it will be necessary to refer to it in
Step 12.
Figure 74: Device IP Address Confirmation Screen
9. Install the VNC software by searching and installing it from the App store.
a.
Mocha VNC Lite for iOS is the software used in this example. (Figure 75)
b. An Internet connection is required for this step.
Complete instructions for installing
Mocha VNC Lite for iOS can be found
online at: http://www.mochasoft.dk/iphone_vnc_help2/help.htm.