MN1941WEN CE & Environmental Guidelines C-3
C.2.2 China RoHS marking
The People's Republic of China Electronic Industry Standard (SJ/T 11364-
2014) specifies the marking requirements for hazardous substances in
electronic and electrical products. The green mark is attached to the drive to
verify that it does not contain toxic and hazardous substances or elements
above the maximum concentration values, and that it is an environmentally-
friendly product which can be recycled and reused.
C.2.3 WEEE notice
According to the requirements of the Waste Electrical and Electronic Equipment
Directive (WEEE) the following information is provided.
This symbol indicates that the product must not be disposed of with other general
waste. It is your responsibility to dispose of your waste electrical equipment by
handing it over to a designated collection point for the recycling of waste
electrical and electronic equipment. The separate collection and recycling of your
waste equipment at the time of disposal will help conserve natural resources and ensure that
it is recycled in a manner that protects human health and the environment. For more
information about where you can recycle your waste, please contact your local authority.
Part Hazardous substances
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(Cr(VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
PCB O O O O O O
Metal parts O O O O O O
Plastic parts O O O O O O
O: Indicates that said hazardous substance contained in all of the homogeneous materials for this part is
below the limit requirement of GB/T 26572.
X: Indicates that said hazardous substance contained in at least one of the homogeneous materials
used for this part is above the limit requirement of GB/T 26572. The limits are:
Pb: 1000 ppm (0.1%)
Cr6+: 1000 ppm (0.1%)
Hg: 1000 ppm (0.1%)
PBB: 1000 ppm (0.1%)
Cd: 100 ppm (0.01%)
PBDE: 1000 ppm (0.1%)
To Next Page
Loading...
Need help?
General
