ABB Pulsar Edge - Page 151

Page 151
© Copyright 2021 ABB. All rights reserved.
Syntax: sum dct1
Description
This command reports the plant trend statistics, which includes up to 16 daily highest hourly and
lowest hourly instantaneous readings, up to 32 daily maximum hourly averages, and up to 13 monthly
averages of the daily maximum hourly averages. The following is an example of a command response:
* sum dct1
:DCT1 SRC=DC1 ADC
CLR=01-JAN-2001,12:00:00 DHI=
29-JAN-2002,02:00;00,123.2
30-JAN-2003,05:00:00,120.1
31-JAN-2003,14:00:00,122.8 DLI=
29-JAN-2002,12:00;00,120.9
30-JAN-2003,08:00:00,118.7
31-JAN-2003,01:00:00,119.2 DHH=
29-JAN-2002,02:00;00,122.1
30-JAN-2003,05:00:00,119.7
31-JAN-2003,14:00:00,121.6 MAV=
31-JAN-2003,23:00:00,121.3
.
*
The “DHI=” indicates daily highest hourly instantaneous reading. The “DLI=” indicates daily highest
hourly instantaneous reading. The “DHH=” indicates daily highest hourly average reading. The “MAV=”
indicates monthly average of daily highest hourly average reading.
The “.” line is the end-of-command identifier. The “* ” in the example above is the user command line
prompt.
sum Report Plant Load Trend Statistics