ABB RER670 - Control and Monitoring Functions

IEC 61850 or
function name
ANSI Function description Railway
RER670
ROV2PTOV 59N Two step residual overvoltage protection 2-C61
Frequency protection
SAPTUF 81L Underfrequency protection 2-C61
1) 67N requires voltage
2.4 Control and monitoring functions
GUID-E3777F16-0B76-4157-A3BF-0B6B978863DE v15
IEC 61850 or
function name
ANSI Function description Railway
RER670
Control
SESRSYN 25 Synchrocheck, energizing check and synchronizing 1-H51
SMBRREC 79 Autorecloser 1-H52
APC10 3 Control functionality for a single bay, max 10
objects (1CB), including interlocking (see Table
4)
1-H37
APC15 3 Control functionality for a single bay, max 15
objects (2CB), including interlocking (see Table
5)
1-H38
QCBAY Bay control 1
LOCREM Handling of LR-switch positions 1
LOCREMCTRL LHMI control of PSTO 1
SXCBR Circuit breaker 6
TCMYLTC 84 Tap changer control and supervision, 6 binary
inputs
1-H53
TCLYLTC 84 Tap changer control and supervision, 32 binary
inputs
1-H54
SLGAPC Logic rotating switch for function selection and
LHMI presentation
15
VSGAPC Selector mini switch 30
DPGAPC Generic communication function for Double Point
indication
16
SPC8GAPC Single point generic control function 8 signals 5
AUTOBITS Automation bits, command function for DNP3.0 2
SINGLECMD Single command, 16 signals 4
I103CMD Function commands for IEC 60870-5-103 1
I103GENCMD Function commands generic for IEC 60870-5-103 35
I103POSCMD IED commands with position and select for IEC
60870-5-103
50
Table continues on next page
Section 2 1MRK 506 375-UEN A
Application
28 Railway application RER670 2.2 IEC
Application manual