ABB RER670 - Measured Value Expander Block RANGE_XP

found in the local HMI under Main menu/Diagnostics/IED status/Pr
oduct
identifiers
The following identifiers are available:
• IEDProdType
• Describes the type of the IED. Example: REL670
• ProductDef
• Describes the release number from the production. Example: 2.1.0
• FirmwareVer
• Describes the firmware version.
• The firmware version can be checked from Main menu/
Diagnostics/IED status/Product identifiers
• Firmware version numbers run independently from the release
production numbers. For every release number there can be one or more
firmware versions depending on the small issues corrected in between
releases.
• ProductVer
• Describes the product version. Example: 2.1.0
1 is the Major version of the manufactured product this means, new platform of the
product
2 is the Minor version of the manufactured product this means, new functions or new
hardware added to the product
3 is the Major revision of the manufactured product this means, functions or hardware
is either changed or enhanced in the product
• IEDMainFunType
• Main function type code according to IEC 60870-5-103. Example: 128
(meaning line protection).
•
SerialNo
• OrderingNo
• ProductionDate
21.3 Measured value expander block RANGE_XP
SEMOD52451-1 v2
21.3.1 Identification
SEMOD113212-2 v3
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Measured value expander block RANGE_XP - -
Section 21 1MRK 506 375-UEN A
Basic IED functions
464 Railway application RER670 2.2 IEC
Application manual