ABB RER670 - Measurement

Section 15 Monitoring
15.1 Measurement
GUID-9D2D47A0-FE62-4FE3-82EE-034BED82682A v1
15.1.1
Identification
SEMOD56123-2 v8
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Measurements CVMMXN
P_Q
IEC15000112 V1 EN-US
-
Phase current measurement CMMXU
I
IEC15000116 V1 EN-US
-
Phase-phase voltage measurement VMMXU
U
IEC15000117 V1 EN-US
-
Current sequence component
measurement
CMSQI
Isqi
IEC15000113 V1 EN-US
-
Voltage sequence component
measurement
VMSQI
Usqi
IEC15000114 V1 EN-US
-
Phase-neutral voltage measurement VNMMXU
UN
IEC15000115 V1 EN-US
-
15.1.2 Application
SEMOD54488-4 v12
Measurement functions are used for power system measurement and supervision,
for reporting to the local HMI, the monitoring tool within PCM600 or to station
level for example, via IEC 61850. The measurement functions operates properly
for 16.7Hz, 50Hz and 60Hz railway power supply systems. The possibility to
continuously monitor measured values of active power
, reactive power, currents,
voltages, frequency, power factor etc. is vital for efficient production, transmission
and distribution of electrical energy. It provides to the system operator fast and
1MRK 506 375-UEN A Section 15
Monitoring
Railway application RER670 2.2 IEC 379
Application manual