Name of input Type Default Description Value when
activated
Value when
deactivated
IN14 BOOLEAN 0 Input 14 8192 0
IN15 BOOLEAN 0 Input 15 16384 0
IN16 BOOLEAN 0 Input 16 32768 0
The sum of the numbers in column “Value when activated” when all INx (where
1≤x≤16) are active that is=1; is 65535. 65535 is the highest boolean value that can
be converted to an integer by the
IB16 function block.
14.11 Integer to Boolean 16 conversion with logic node
representation
ITBGAPC
SEMOD158419-1 v3
14.11.1 Identification
SEMOD167944-2 v4
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Integer to boolean 16 conversion with
logic node representation
ITBGAPC - -
14.11.2 Application
SEMOD158512-5 v7
Integer to boolean 16 conversion with logic node representation function
(ITBGAPC) is used to transform an integer into a set of 16 boolean signals.
ITBGAPC function can receive an integer from a station computer – for example,
over IEC 61850–8–1. This function is very useful when the user wants to generate
logical commands (for selector switches or voltage controllers) by inputting an
integer number. ITBGAPC function has a logical node mapping in IEC 61850.
The Integer to Boolean 16 conversion with logic node representation function
(ITBGAPC) will transfer an integer with a value between 0 to 65535
communicated via IEC 61850 and connected to the ITBGAPC function block to a
combination of activated outputs OUTx where 1
≤x≤16.
The values of the different OUTx are according to the Table
37.
If the BLOCK input is activated, it freezes the logical outputs at the last value.
Section 14 1MRK 506 375-UEN A
Logic
372 Railway application RER670 2.2 IEC
Application manual
To Next Page
Loading...
