15.8.3 Setting guidelines
GUID-5AECCDBC-7385-4D9F-940C-9D4A0E59B106 v1
GUID-DA5DA8D7-4821-4BFB-86CC-28658E376270 v1
The parameters for Limit counter L4UFCNT are set via the local HMI or PCM600.
15.9 Running hour-meter TEILGAPC
15.9.1 Identification
GUID-3F9EF4FA-74FA-4D1D-88A0-E948B722B64F v1
Function Description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2 device
number
Running hour-meter TEILGAPC - -
15.9.2 Application
GUID-225D8341-2D31-49F1-9B49-571346C0FE26 v1
The function is used for user-defined logics and it can also be used for dif
ferent
purposes internally in the IED. An application example is to accumulate the total
running/energized time of the generator, transformer, reactor, capacitor bank or
even line.
Settable time limits for warning and alarm are provided. The time limit for
overflow indication is fixed to 99999.9 hours. At overflow the accumulated time
resets and the accumulation starts from zero again.
15.9.3 Setting guidelines
GUID-D3BED56A-BA80-486F-B2A8-E47F7AC63468 v1
The settings tAlarm and tWarning are user settable limits defined in hours. The
achievable resolution of the settings is 0.1 hours (6 minutes).
tAlarm and tWarning
are independent settings, that is, there is no
check if tAlarm > tWarning.
The limit for the overflow supervision is fixed at 99999.9 hours.
The setting tAddToT
ime is a user settable time parameter in hours.
15.10 Fault locator RWRFLO
GUID-B2D10155-82D9-4475-A69E-FA41EBBA6A31 v1
15.10.1 Identification
GUID-1F14BF5D-8159-47F8-8060-0C517C7BB7EA v1
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Fault locator RWRFLO -
1MRK 506 375-UEN A Section 15
Monitoring
Railway application RER670 2.2 IEC 405
Application manual
To Next Page
Loading...
