ABB RER670 - Page 40

IEC 61850 or function
name
ANSI Function description Railway
RER670
DNPFREC DNP3.0 fault records for TCP/IP and EIA-485
communication protocol
1
IEC 61850-8-1 IEC 61850 1
GOOSEINTLKRCV Horizontal communication via GOOSE for interlocking 59
GOOSEBINRCV GOOSE binary receive 11
GOOSEDPRCV GOOSE function block to receive a double point value 40
GOOSEINTRCV GOOSE function block to receive an integer value 24
GOOSEMVRCV GOOSE function block to receive a measurand value 56
GOOSESPRCV GOOSE function block to receive a single point value 40
MULTICMDRCV,
MULTICMDSND
Multiple command and transmit 60/10
OPTICAL103 IEC 60870-5-103 Optical serial communication 1
RS485103 IEC 60870-5-103 serial communication for RS485 1
AGSAL Generic security application component 1
LD0LLN0 IEC 61850 LD0 LLN0 1
SYSLLN0 IEC 61850 SYS LLN0 1
LPHD Physical device information 1
PCMACCS IED configuration protocol 1
SECALARM Component for mapping security events on protocols
such as DNP3 and IEC103
1
FSTACCS Field service tool access 1
IEC 61850-9-2 Process bus communication, 8 merging
units
1-P30
ACTIVLOG Activity logging 1
ALTRK Service tracking 1
PRP IEC 62439-3 Parallel redundancy protocol 1-P23
HSR IEC 62439-3 High-availability seamless redundancy 1-P24
PTP Precision time protocol 1
FRONTSTATUS Access point diagnostic for front Ethernet port 1
SCHLCCH Access point diagnostic for non-redundant Ethernet port 6
RCHLCCH Access point diagnostic for redundant Ethernet ports 3
DHCP DHCP configuration for front access point 1
QUALEXP IEC 61850 quality expander 96
Remote communication
BinSignRec1_1
BinSignRec1_2
BinSignReceive2
Binary signal transfer receive 3/3/6
BinSignTrans1_1
BinSignTrans1_2
BinSignTransm2
Binary signal transfer transmit 3/3/6
Table continues on next page
Section 2 1MRK 506 375-UEN A
Application
34 Railway application RER670 2.2 IEC
Application manual