ABB RET615 - Indication Bits Mirrored in Registers; SSR1 System Status Register (1) Device Health

RegA Type Scale IEC 61850 name SA name Description Values
9216 Minute 0...59
9217 Second 0...59
9218 Millisecond 0…999
1) See the technical manual.
2.4.1.16 Indication bits mirrored in registers
The pre-mapped indication bit data has been mapped from indication bit address 2720
onwards. The bit data is mirrored in registers starting from register address 170
onwards.
Table 119: Indication bits mirrored in registers
RegA Type Scale IEC 61850 name SA name Description Values
170.00 Bit Indication bit 2720 (0x1700)
170.01 Bit Indication bit 2721 (0x1701)
: : :
170.14 Bit Indication bit 2734 (0x170E)
170.15 Bit Indication bit 2735 (0x170F)
171.00 Bit Indication bit 2736 (0x1710)
: : :
2.4.1.17 SSR1 System status register (1) device health
Table 120: SSR1 System status register (1) device health
RegA
Type Scale IEC 61850 name SA name Description Values
128.00 Bit Device global error 1=Error
128.01 Bit Device global warning 1=Warning
128.02 Bit < reserved > 0
128.03 Bit < reserved > 0
128.04 Bit < reserved > 0
128.05 Bit < reserved > 0
128.06 Bit < reserved > 0
128.07 Bit < reserved > 0
128.08 Bit < reserved > 0
128.09 Bit < reserved > 0
128.10 Bit < reserved > 0
128.11 Bit < reserved > 0
128.12 Bit < reserved > 0
128.13 Bit < reserved > 0
128.14 Bit < reserved > 0
128.15 Bit < reserved > 0
Section 2 1MRS756878 H
Modbus data mappings
66 RET615
Point List Manual