ABB RET615 - Fault Record Data; Fault Record Structure Header

RegA Type Scale IEC 61850 name SA name Description Values
9351 u16 1 - Record sequence num 1...9999
9352 u16 1 - Unread records left 0...499
Timestamp of record
9353 u16 1 - Year, Month Year/Month
9354 u16 1 - Day, Hour Day/Hour
9355 u16 1 - Minute, Second Min/Sec
9356 u16 1 - Millisecond Millisecond
9357 u16 1 Event identification
1)
9358 u16 1 Data object ID1
1)
9359 u16 1 Data object ID2
1)
9360 u16 1 Event data value 1
1)
9361 u16 1 Event data value 2
1)
1) See the technical manual.
2.4.1.12 Fault record structure header
Table 115: Fault record structure header
RegA
Type Scale IEC 61850 name SA name Description Values
Selection write
9401 i16 1 Read selection -99…3
Record data header
9402 u16 1 Record sequence num 0...65535
9403 u16 1 Unread records left 0...99
Timestamp of record
9404 u16 1 Year, month Year/Month
9405 u16 1 Day, hour Day/Hour
9406 u16 1 Minute, second Min/Sec
9407 u16 1 Millisecond Millisecond
9408 u16 1 Timestamp quality
2.4.1.13 Fault record data
The table shows all potential data available in the fault record application. Which data
is actually recorded depends on the functions available and enabled in the protection
relay's configuration.
1MRS756878 H Section 2
Modbus data mappings
RET615 61
Point List Manual