ABB STT04 - Page 270

Worksheet
STT04
EBTH Platinum Standard Series Temperature Transmitter
Configuration
IDTAG (≤8 digits, alphanumeric)
MODE □ Analog □ Digital
MESSAGE DESCRIPTOR
DATE ________________ Day/month/year
SENSOR TYPE □ Thermocouple □ RTD □ Millivolt □ Ohms
Thermocouple □ N □ B □ E □ J □ K □ R □ S □ T □ C
RTD □ 100 Ohms (Pt 385) □ 100 Ohms (Pt 392)
NUMBER OF ELEMENTS □ Single □ Dual
Number of Wires □ 2 □ 3 □ 4
ENGINEERING UNITS □ Celsius □ Fahrenheit □ Kelvin □ Richtor
OUTPUT TYPE Function Generator □ Yes □ No
Input _____%
_____%
_____%
_____%
_____%
Point 1
Point 2
Point 3
Point 4
Point 5
_____%
_____%
_____%
_____%
_____%
Point 6
Point 7
Point 8
Point 9
Point 10
_____%
_____%
_____%
_____%
_____%
Point 11
Point 12
Point 13
Point 14
Point 15
_____%
_____%
_____%
_____%
_____%
Point 16
Point 17
Point 18
Point 19
Point 20
Output _____%
_____%
_____%
_____%
_____%
Point 1
Point 2
Point 3
Point 4
Point 5
_____%
_____%
_____%
_____%
_____%
Point 6
Point 7
Point 8
Point 9
Point 10
_____%
_____%
_____%
_____%
_____%
Point 11
Point 12
Point 13
Point 14
Point 15
_____%
_____%
_____%
_____%
_____%
Point 16
Point 17
Point 18
Point 19
Point 20
OUTPUT ACTION □ Normal □ Reverse
DAMPING _______ sec (0.00 to 32.00 sec)
LOWER RANGE VALUE _______ Specified LRV _______ LRV
UPPER RANGE VALUE _______ Specified URV _______ URV
INITIALIZE MODE
1
□ Low □ High
FAIL MODE
1
□ Low □ High □ Last
SECONDARY UNITS _______ Secondary LRV _______ Secondary URV
TEMPERATURE ALARM _______ Lower _______ Upper
NOTE:
1. Select to maintain safe operation during start-up and diagnostically detected failures of the transmitter.