- 9 -
T003CH1
Warnings in this document
This is a list of special safety symbols used in this manual that highlight potential safety risks and/or useful
information. The symbol usage is described below:
CAUTION
The reader should stop, use caution and fully understand the operations
explained before proceeding.
DANGEROUS VOLTAGE
The product works with high voltages. All work on the TRIO must follow
the described documentation and must comply with all prevailing codes and
regulations associated with high voltages.
HOT TEMPERATURE
Some surfaces may become hot; wear appropriate personal protective
equipment (PPE) when working with this product.
UL1741 Standard for Safety for Inverters, Converters, Controllers and
Interconnection System Equipment for use with Distributed Energy
Resources. CSA-C22.2 No. 107.1-01 - General Use Power Supplies.
Equipment safety warnings
In addition to the safety and hazard symbols, the following symbols are also used in this
installation guide
Equipment Ground, protective earth
Alternating current (AC)
ø
Phase
Direct current (DC) Grounding (earth)
1
Introduction and safety
To Next Page
Loading...
