Information menu
The INFO menu provides information about the inverter and access to modify the country
standard for grid connection.
Part No. - Displays the TRIO part number.
Serial No. - Displays the TRIO serial number and the week (from 1 to 52) and year of manufacture.
Firmware - Displays the revision of the rmware installed in the equipment.
Country selector - Displays information regarding the grid standard set with the rotary selectors.
• Actual value: Displays the set grid standard.
• New value: If the position of the rotary switches is changed (a new grid standard is selected)
during operation, the new standard selected will be displayed but will be made effective only
after the equipment has been switched off and then on again and only if the time remaining
for carrying out this operation has not expired (24 hours of operation).
• Set new value: Allows conrm/set of the new grid standard set in the “New value” section of
the previous menu. When this function is used, there will be no correspondence between the
standard selected on the display and the position of the rotary selectors.
• Residual time: Displays the time remaining in which it is still possible to set a new grid
standard. When the time expires, “Locked” will be displayed.
INFO Part No.
Serial No.
Firmware
Country selector
New Value
Set New Value
Actual value
Residual time
To Next Page
Loading...
