- 3 -
T001CV
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important safety instructions that must be followed during installation and
maintenance of the rapid shutdown system.
SAVE THESE INSTRUCTIONS!
Keep this document in a safe place near the inverter for easy access during installation and
maintenance.
THE INSTALLER MUST READ THIS DOCUMENT IN ITS ENTIRETY BEFORE INSTALLING
THIS EQUIPMENT.
The purpose of this document is to support the qualied technician, who has received training and/
or has demonstrated skills and knowledge in construction, to install and maintain this inverter. This
manual covers only the details concerning the rapid shutdown components and how it is installed in
the allowable ABB string inverters. Information concerning the equipment connected to this product is
available from the respective manufacturers.
Warranty conditions can be found on the Rapid Shutdown product page of the website. NOTE:
Any changes or modications not approved by the manufacturer could void the warranty of this
product.
.
FCC REMARKS
The equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.