Abbott AEROSET - Page 214

PROPRIETARY INFORMATION
CONFIDENTIAL MATERIAL
Software Not for Customer Distribution
214
AEROSET
®
System Troubleshooting Guide
94816-107—November 2004
5. For the Unit Configuration screen only: select <OK> on
the Save Parameters confirmation dialog window to
return to the c:\ prompt.
6. Type exit then press [Enter].
7. Select the Exit icon in the Action Area of the Main Display
to Log Off the system.
8. On the Log On screen, type bye in the User Code field.
9. Perform the Power OFF Procedure; wait 15 seconds then
Power ON the system.