PROPRIETARY INFORMATION
CONFIDENTIAL MATERIAL
Assays/Reagents Not for Customer Distribution
30
AEROSET
®
System Troubleshooting Guide
94816-107—November 2004
7. Select the Calibration tab to access the Calibration page.
Figure 6: Assay Configuration Screen, Calibration Page
8. Select the list box icon next to the Calib Mode field. Select
<Abs> then select the return arrow to close the list.
9. Select <OK> in the upper right corner of the Assay
Configuration screen. The Save dialog window displays.
10. Select <OK> to save the settings.
11. Repeat steps 1 through 10 for each DOA assay installed.
Abs
To Next Page
Loading...
