MC96F6432
18 June 22, 2018 Ver. 2.9
OCD emulator: It can write code in MCU device too, because OCD debugging supports ISP (In System
Programming).
It does not require additional H/W, except developer’s target system.
Gang programmer: E-GANG4 and E-GANG6
- It can run PC controlled mode.
- It can run standalone without PC control too.
- USB interface is supported.
- Easy to connect to the handler.
Figure 1.3 E-GANG4 and E-GANG6 (for Mass Production)
To Next Page
Loading...
