1.4. Product History and Documentation Validity
The ACOM 700S solid-state power amplifier serial production started in March 2018. The production has
continued to these days without functional changes and with hardware improvements only.
This manual refers to the ACOM 700S amplifier and describes the operating possibilities of all amplifiers
produced till the publishing date of this manual.
This manual is valid till a new manual is issued.
Table 1-1 | Production versions history
Table 1-1 | Production versions history
1.5. Additional Documentation
For further important information, please, refer to the following documentation:
• ACOM 700S Brochure;
• ACOM CAT cables Technical Information;
• ACOM 04AT User's Manual;
• ACOM 06AT User's Manual;
• ACOM eBox User's Manual.
The documentation is available for download at www.acom-bg.com.
1.6. Product Identification
Every ACOM product features an ID (identification) label/plate. On this label, you can find data identifying
the device. Which product identification data are important?
• Model designation - The model designation is the name of the device;
• Serial Number - Most products have their own serial number. The serial number is a
consecutive number for unique identification of products with the same model designation.
It serves to ensure traceability of a product after it has been put in circulation, e.g., to find
the date of invoice that is required to determine guarantee and warranty periods. The term
serial number is mostly abbreviated to SN or S/N.
To Next Page
Loading...
