• Press the U letter from your keyboard to activate the Firmware Upload process.
Press the Y letter from your keyboard to answer the question that appears:
CURRENT FIRMWARE WILL BE ERASED! ARE YOU SURE (N/N)?
A new dialog box will open asking for the new firmware file name and location. Open the
folder that contains the new firmware file (*.dat), select the file, and press the Upload
button (We assume that you downloaded the newest firmware from www.acom-bg.com and
unzipped it on your PC);
Figure 7-18 | Terminal S - Upload firmware process
Figure 7-18 | Terminal S - Upload firmware process
The Upload firmware process may take approx. 3-6 minutes.
During the Firmware Update Process, the user's amplifier settings are kept and are
available in the new firmware version.
To Next Page
Loading...
