f) Main fuses
Please, see Figure 2-4 | Rear panel - Connections, Pos. (f).
NOTICE
Make sure you check whether the main fuses installed in your amplifier correspond to
your local mains nominal voltage. If occasion should require replacement of the mains
fuses, replace them as described in Section 7.3 Fuse Replacement!
g) Power cord
Please, see Figure 2-4 | Rear panel - Connections, Pos. (g).
Due to the different standards in different countries, the mains plug for the amplifier power supply cable is
supplied and mounted by the dealer. He connects to the mains cord end a standard mains supply plug
which meets the Safety Class I unit standard in your country.
The ground lead of the amplifier's power cord is colored yellow with two green stripes and the blue and
brown leads are active. When the amplifier is to be used with only one mains fuse, it is connected in series
with the brown lead, which must be the active.
Table 2-1 | Power cord connections
Table 2-1 | Power cord connections
If you have any doubts about the correct way of connecting the wires, consult your dealer.
To Next Page
Loading...
