• Antenna relay contacts against hot switching
• Reflected power
• Overdrive.
c) Frequency control by either internal frequency counter or directly by CAT from the
transceiver, as well as via front panel buttons
d) Remote control through ACOM eBox Ethernet Remote Control device or via RS-232 interface
e) Remote POWER ON by DSR/DTR and CTS/RTS lines on the RS-232 port or by ACOM eBox
Ethernet Remote Control device
f) Remote POWER ON / TURN OFF by DC voltage impulse or continuous DC voltage on CAT/AUX
port ON_RMT input
g) Protection against relay switching under RF power (hot switching).
To Next Page
Loading...
