6146/6156 DC Voltage/Current Generators Operation Manual
2.2.7 Continuous Function
2-35
Setting the step time
1. Press STEP TIME.
2. Change the step time with , or .
Direct data input using DATA is also available.
3. Press STEP TIME or EXIT to exit the step time setting screen and return to the
HOME screen.
NOTE: The setting range of the step time is from 0.02 s to 10.00 s.
However, the actual step time for thermal electromotive force output is 0.15
s even if the step time is set to less than 0.15 s.
Cursor (blinking)
To Next Page
Loading...
Need help?
General
