SPEED
The Speed ash effect multiplies the speed of all effects by the set multiplier. The effect is released
according to the set release mode.
Displayed data:
• Icon to indicate the effect is playing (this can be disabled within the settings).
• The speed multiplier.
• The set release mode.
Encoder actions:
• Moving the rst encoder sets the speed multiplier.
Other actions:
• Tapping one of the buttons on the rst column of the matrix sets the speed multiplier between Freeze,
0.5x, 2x, 4x, 8x.
• Tapping one of the buttons on the fourth column of the matrix sets the release mode.
34
To Next Page
Loading...
