SMOKE
The Smoke ash effect sets Smoke channels. The effect is released according to the set release mode.
Displayed data:
• Icon to indicate the effect is playing (this can be disabled within the settings).
• The Smoke intensity.
• The set release mode.
Encoder actions:
• Moving the rst encoder sets the intensity of the smoke
Other actions:
• Tapping one of the 4 buttons on the top row of the matrix sets the smoke intensity to 1%, 25%, 50%,
75% and 100%
• Tapping one of the buttons on the fourth column of the matrix sets the release mode.
36
To Next Page
Loading...
