ACTIVATION
Wolfmix must be activated at ADJ.com before it can be used. The supplied key is unique to each Wolfmix
controller. Each activation key has a unique response key which will be provided by the website during
the activation process. Tapping Enter Response will display a keyboard to enter the response key. This
process is only required one time. If the keyboard does not disappear when the response is entered, then
the key is incorrect.
STARTUP KEY-COMBINATIONS
Several special startup modes are available by powering the controller whilst holding the following key
combinations:
• WOLF + STROBE : performs a test sequence including touch screen, buttons, encoders, microphone
and DMX connectors. Connect DMX connector A to connector B, and connect DMX connector C to D.
• WOLF + BLINDER : restores the default project which is loaded when creating a new project. Useful
when the currently loaded project has a problem.
• WOLF + SPEED : enters Wolfmix rmware recovery mode. Used to write a new rmware version if
the main rmware does not start.
• WOLF + BLACKOUT : erases all data, including xture projects and xture proles.
• WOLF + SMOKE : restores the factory rmware which came with the Wolfmix. Used in a critical
situation whereby the rmware becomes unusable and a PC/MAC is not available to update to the
latest rmware.
• SHIFT + PRESET : enter bootloader mode. All lights will ash white. This is used during factory
production only.
7
To Next Page
Loading...
