SPECIFICATIONS
Setup
• Standalone (no computer needed)
• Compatible with any DMX device
• 1 Universe standard, with up to 4 DMX universes
via purchase upgrade for a total of 2048 channels.
• Up to 680 xtures & beams
• Up to 50 xture types
• Up to 5000 xture features (color/gobo etc...)
• 8 xture groups
• 6 projects
• 15000+ available xtures (3500+ on the controller)
• DMX address, xture order & group setup
• Use as a DMX splitter with DMX universe mapping
Palettes & FX
• Color FX module with 8 effect types & 16 denable
colors
• Move FX module with 8 effect types
• Beam FX module with 8 effect types
• 6 Flash buttons for controlling Special FX, Strobe,
Blinder, Speed, Blackout & Smoke
• Static color palette with 10 user denable colors
per group & gradient control
• Static position palette with 5 user denable positions
per group with fade & fanning
• Gobo palette with 5 user denable gobos per group
• 20 namable live edit buttons with ash triggering
mode and ‘Park’ function
• 100 namable presets for storing snapshots with
hold and fade timings
• Preset playback cue list- all presets or per page of
20 presets
Control & Sync
• Group and master dimming with encoder
acceleration
• Group FLASH, FULL and Blackout
• 16 bit Pan/Tilt control
• Multi-beam LED bar control
• FX music pulse sync from Microphone or Line-In
• FX BPM sync with Ableton Link, OS2L or BPM TAP
• Effect Speed, Phase, Order, Size, Fade, Fan &
Flick
• Live control of move FX registration point
• Global FX speed and freeze control
• Map DMX IN with group dimmer and patch to
output channels*
• WLINK - sync with another Wolfmix controller
Built-in tools
• Fixture Builder
• Fixture calibration tool, to limit the area of moving
xtures
• X-Y touch controlled positioning grid
• RGBW touch controlled color picker
• 8-step real time sequencer for creating beam and
move FX
• Live view of DMX levels with default value override
and DMX channel tester
• Beam Editor to override Min and Max values used
in generated FX
Other neat features
• Calibrate and RGB, White, Amber, UV mixing with
automatic xed color wheel translation
• Automatic matching of similar gobos across
different xture types
• Timed release of ash and preset buttons
• Fixture FLIP function, for reversing beam order
• Fixture SPLIT function, for splitting up multi-FX bars
• Lock full controller, or lock editing with a password
• Project & xture backup with WTOOLS app
• Ofine 3D visualization with Easy View & WTOOLS
over USB*
• Auto-recovery of active project (no manual saving
needed)
• Import different xture setups into the same project
• Starts in under 2 seconds. Starts sending DMX in
under 1 second
• Factory rmware startup recovery mode for times
of crisis
*some features require an add-on purchase
available through the WTOOLS app
Display
• 4.3” Color TFT with tinted glass
• Capacitive touch
Encoders
• Full body alloy
• Incremental push with acceleration
Button pads
• 37 Silicone buttons with matt oil nishing
• LED color backlit
Processing
• 220Mhz CPU with ARM core
• 8MB RAM
• 16MB Flash
Audio
• Omnidirectional electret mic
• 3.5mm Jack Line-In
• Analog adaptive peak detector
DMX
• 2x 3pin DMX OUT XLR connectors
• 1x 5pin DMX OUT XLR connector
• 1x 5pin DMX IN/OUT XLR connector with WLINK
Housing
• ABS Plastic
• Powder-coated steel base plate with 100mm VESA
(M4 6mm max)
• Powder-coated steel reinforced back plate
Size & weight
• 195 x 220 x 62 mm / 7.68 x 8.66 x 2.44 in
• 1070g / 2.36lb
52
To Next Page
Loading...
