Adobe PREMIERE 5 - Mixing Audio

209
ADOBE PREMIERE 5.0
User Guide
To specify a default transition.
1 If necessary, choose Window > Show Transitions.
2 Select the Transition you want to become the default.
3 From the palette menu choose Set Selected As Default.
4 Type the default duration for the transition. (You can later change the duration once the
transition is added to the Timeline.)
5 Click OK. This setting remains in effect for all projects until you change it.
To add the default transition:
1 Position one clip in the Video 1A track and another clip in the Video 1B track so that some
(or all) of the two clips overlap. If the Video 1 track is collapsed, position the clips so that they
either meet or overlap.
2 Position the edit line where the two clips meet or overlap.
3 Do one of the following:
•
In the Monitor window, click the Default Transition ( ) button, or press Control+D
(Windows) or Command+D (Mac OS). This technique works only if there are extra frames
available at the start and end points of the adjacent clips.
•
In the Timeline, expand the Video track if necessary, press Control + Alt + Shift (Windows)
or Command + Option + Shift (Mac OS) and click in the Transition track between two
overlapping clips. This technique only works if the two clips overlap.
c00.book for PS Page 209 Tuesday, March 31, 1998 1:28 PM