EKI-1526(TI) | 1528(TI) User Manual 26
The EKI series includes a software utility option, which you can install on your sys-
tem, for configuration through computer-based software. The EKI series also
includes a web interface option for configuration through a standard web browser.
You can choose from four possible IP Configuration modes --- Static, DHCP, BOOTP,
and DHCP/BOOTP.
Figure 3.13 Network Settings Overview
Click Reboot to reboot the serial device server. Any configuration changes you have
made since the last time you saved will be lost.
Item Description
Static IP Static IPUser defined IP address, Subnet Mask, and Default Gateway.
DHCP + Auto-IP DHCP Server assigned IP address, Subnet Mask, Default Gateway,
and DNS.
BOOTP + Auto-IP BOOTP Server assigned IP address.
DHCP + BOOTP +
Auto-IP
DHCP Server assigned IP address, Subnet Mask, Default Gateway,
and DNS, or BOOTP Server assigned IP address. (If the DHCP
Server does not respond)
DNS Setting In order to use DNS feature, you need to set the IP address of the
DNS server to be able to access the host with the domain name. The
EKI serial device server provides Primary DNS Server and Secondary
DNS Server configuration items to set the IP address of the DNS
server. Secondary DNS Server is included for use when Primary DNS
server is unavailable.
DHCP Advanced
Setting
When you enabling DHCP protocol to get IP address, it will be waited
DHCP server to give IP within DHCP time out. The default value is
180 seconds.
Note! When you have finished the configuration of these settings for each cat-
egory, please press the “Apply” button in order to make these settings
effective on the Serial Device Server.
To Next Page
Loading...
Need help?
General
