EKI-1526(TI) | 1528(TI) User Manual 28
3.5 Administrator Settings
3.5.1 Locate the Serial Device Server
When several serial device servers are connected to the network, identification of a
specific serial device is possible through the Locate function.
To locate the serial device server:
1. From the device list frame, locate the desired device and right-click on it to dis-
play the settings menu.
2. Select Locate from the menu.
Figure 3.15 Locate the Serial Device Server
The unit’s Status LED will turn solid amber, and the buzzer will make a beep sound
until you click Stop Locate.
To Next Page
Loading...
