Advantech EKI-1526 - 6.5.2 Operation

EKI-1526(TI) | 1528(TI) User Manual 56
6.5.2 Operation
The Operation menu allows for the configuration of the mode type and related attri-
butes for port configuration.
To access this page, click Port Configuration > Operation.
Figure 6.5 Port Configuration > Operation
The following table describes the items in the previous figure.
Stop Bits Click the drop-down menu to select the stop bits: 1, 1.5 or 2.
Flow Control Click the drop-down menu to select the flow control mode: None,
XOn/XOff, RTS/CTS or DTR/DSR
Save Click Save to save the values and update the screen.
Item Description
Item Description
Mode Click the drop-down menu to select the port configuration mode: Vir-
tual COM Mode, USDG Data Mode, USDG Control Mode or RFC2217
Mode.
Virtual COM Mode
Host Idle Timeout (s) Enter a value to define the host idle timeout period.
Response Timeout
(ms)
Enter a value to define the response timeout period.
Frame Break (ms) Enter a value to specify the frame break time.