69 EKI-1526(TI) | 1528(TI) User Manual
6.9.2 Reboot
The configuration will take effect after clicking Save button. But all configurations are
saved to flash memory after a system reboot. Press the Reboot button and the sys-
tem will give a reset response. It will take a few seconds to reconnect with the new
values.
To access this page, click Tools > Reboot.
Click Reboot to reboot the serial device server. Any configuration changes you have
made since the last time you saved will be lost.
6.10 Management
The EKI serial device server allows for easy installation and maintenance and reli-
able maintenance access from anywhere. With the reliable management tools avail-
able, you can streamline staffing and troubleshooting requirements to a centralized
system.
6.10.1 Log File
If users enable the system event or serial event to log in file, users can download the
log file from here.
To access this page, click Management > Log File.
Figure 6.15 Management > Log File
The following table describes the items in the previous figure.
6.10.2 Change Password
The Change Password function allows you to easily update your current password
from a single menu.
To access this page, click Management > Change Password.
Figure 6.16 Management > Change Password
Item Description
System Log File Click the drop-down menu to select a specific action for the system
log file. Available options: Download System Log, Remove System
Log, Download and Remove System Log.
Save Click Save to save the values and update the screen.
To Next Page
Loading...
Need help?
General
