41 EKI-1526(TI) | 1528(TI) User Manual
4.5 RFC2217 Mode
RFC2217 mode is similar to virtual COM mode in that a driver is used to establish a
transparent connection between a host computer and a serial device by mapping the
serial port on EKI-1528 Series devices to a local COM port on a host computer.
RFC2217 defines general COM port control options based on the Telnet protocol.
Third party drivers supporting RFC2217 are widely available on the Internet and can
be used to implement virtual COM mapping to the serial port of your device.
<LF><CR> ERROR <LF><CR> Incorrect commands
<LF><CR> FAIL <LF><CR> If you issue an ATDT command and can not connect to
the device, it will response “FAIL”.
Command Function
To Next Page
Loading...
Need help?
General
