EKI-1526(TI) | 1528(TI) User Manual 32
3.5.4 Resetting the Device
The Reset Device allows you to reset the serial device server. The function discon-
nects both the ethernet and serial connections.
The function also allows the serial device server to save new configuration settings to
flash memory. Once a new setting is changed, you can use the Save function to
accept the changes. You will need to reset the device to save the settings to flash
memory.
To access this page, click Tools > Reboot.
Click Reboot to reboot the serial device server. Any configuration changes you have
made since the last time you saved will be lost.
To reset the device:
1. Right-click a desired device to display the settings menu.
2. Select Reset Device.
Figure 3.20 Change Password
The device resets. Once the process is complete, the serial device server displays
under the Serial Device Server listing once again.
3.5.5 Add to Favorite
The Add to Favorite function allows to easily map available devices to Favorite’s. By
bookmarking specific devices, you can create quickly accessible shortcuts for exist-
ing critical devices from the vast pool of locally or remotely networked EKI devices.
3.5.6 Auto Mapping
See “Auto Mapping” on page 43 for further details.
3.5.7 Manual Mapping
See “Manual Mapping” on page 45 for further details.
To Next Page
Loading...
Need help?
General
