Advantech EKI-1526 - Mvcom; Mctrl; Mdata

79 EKI-1526(TI) | 1528(TI) User Manual
Usage: portadv [nn|all] dtr []
Set port DTR status.
– value 0 :None Setting.
– value 1 :Setting power on.
– value 2 :Setting accept on.
– value 4 :Setting transmission on.
7.4.4 mvcom
Usage: mvcom
Show all port mode and mode informations.
Usage: mvcom [nn|all]
Set port [nn|all] as virtual COM port mode.
Usage: mvcom [nn|all] idleto []
Set host idle timeout(s).
Usage: mvcom [nn|all] respto [] framebk []
Set response timeout(ms) and frame break(ms).
Usage: mvcom [nn|all] bysize []
Usage: mvcom [nn|all] bytime []
Usage: mvcom [nn|all] bychar [NULL|]
Set datapackage as size(bytes) or time(ms) and character(HEX) .
– value 0 : None Setting.
7.4.5 mctrl
Usage: mctrl
Show port mode and mode informations.
Usage: mctrl [nn|all]
Set port [nn|all] as control mode.
Usage: mctrl [nn|all] idleto [] tcpp [] atp [] guardt [] hangchr []
Set data idle timeout(s) data listen port command listen port guard time(ms)
hangup character.
7.4.6 mdata
Usage: mdata
Show port mode and mode informations.
Usage: mdata [nn|all]
Set port [nn|all] as data mode.
Usage: mdata [nn|all] protocol [TCP|UDP]
Set transmit protocol as TCP or UDP.
Usage: mdata [nn|all] idleto [] lsport [] atport []
Set data idle timeout(s) listen port and AT command port.
Usage: mdata [nn|all] respto [] framebk []
Set response timeout(ms) and frame break(ms).
Usage: mdata [nn|all] bysize [] bytime [] bychar [NULL|] bychartimeout [ON|OFF]
Set datapackage as size(bytes) or time(ms) or character(HEX) and character-
timeout.
– value 0 : None Setting.