Advantech EKI-1526 User Manual

EKI-1526(TI) | 1528(TI) User Manual 64
6.7.2 Event
In this page, you can configure events which will trigger logging or notification. You
can select three methods (Mail, SNMP, or log file) to record or send event messages.
System event notification is available for cold start, warm start, authentication failure,
IP address/Password change, serial DCD/DSR port change and Ethernet link down
information.
Trap Server Use this field to indicate the IP address to use for receiving SNMP
traps.
Trap Server Port Enter the SNMP Trap server port.
Trap Version (default = v1): Use this field to select the SNMP trap version.
Trap Community Use this field to designate the SNMP trap community.
SNMP Agent Setting
Read Community Read community name of your agent.
Write Community Write community name of your agent.
Contact Identify the system contact of your agent.
Location Identify the system location of your agent.
Save Click Save to save the values and update the screen.
Item Description

Advantech EKI-1526 Specifications

General

Brand	Advantech
Model	EKI-1526
Category	Server
Language	English