5. Service Tables
Service Program Mode
• Do not let the user access the SP mode. Only service representatives are allowed to access the SP
mode. The machine quality or its operation is NOT guaranteed if persons other than service
representatives accesses the SP mode.
SP Tables
See "Appendices" for the following information:
• System SP Tables
How to Enter the SP Mode
The following two modes are available:
• SP Mode (Service Program Mode): The SP Mode includes the programs that are necessary for
standard maintenance work.
• SSP Mode (Special SP Mode): The SSP Mode includes SP-Mode programs and some special
programs. You need some extra knowledge to manipulate these special programs. For details, consult
your supervisor.
Starting SP Mode/ Starting SSP Mode
Ask your supervisor if needed.
Selecting Programs
101
To Next Page
Loading...
