4941 1
Selects the white line erase level.
0: None, 1: Weak, 2: Strong
This setting is effective only Photo 1, Photo 3, Special 3 or Special 4 mode.
0: White line erase is not used, and white level correction is used instead.
This setting is applied regardless of what mode has been selected in SP 4921.
4942* Black Line Erase [0 to 3 / 2 / 1/step]
4942 1
Selects the black line erase level. This setting is effective only when originals are scanned
by the ADF.
[0 = No / 1 = Very weak / 2 = Weak / 3 = Strong]
This setting is applied regardless of what mode has been selected in SP 4921.
SP5-XXX (Mode)
5001 All Indicators On
5001 1
All LEDs turn on. The LCD turns on or off every 3 seconds. Press the reset key to end this
program.
5104* A3/DLT Double Count
[0 = Enabled / 1 = Disabled /
2 = Disabled if the size is undetected]
5104 1
Selects whether the machine counts twice for each sheet of A3/11"x 17". If this is set to
"Yes" is selected, the total (mechanical) counter and the current user counter will both
increment by two for each A3/11" x 17" sheet.
5113* Optional Counter Type
0: None
11: MF key card (Increment)
12: MF key card (Decrement)
5113 1 Selects the corresponding key for installed devices such as coin lock.
5120* Clr-OP Count Remv [0=Yes / 1=Standby only / 2=No]
4. Appendix: SP Mode Tables
44
To Next Page
Loading...
