4926 1 Texture Removal (Copy) [0 to 6 / 1/step]
4927*
Line Width Correction
Adjusts the line width correction algorithm. Positive settings produce thicker lines; negative
settings produce thinner lines. This setting is only applied to the originals in SP 4921.
4927 1 Line Width Correction (Copy) [–2 to 2 / 0 / 1/step]
4928*
Independent Dot Erase
Selects the dot erase level. Higher settings provide greater erasure. This setting is only
applied to the originals in SP 4921.
4928 1 Independent Dot Erase (Copy) [–2 to 2 / 0 / 1/step]
4929*
Positive/Negative [0 = No, 1 = Yes]
Inverts white and black. This setting is only applied to the originals in SP 4921.
4929 1 Positive/Negative (Copy)
4930*
Sharpness-Edge [–2 to 2 / 0 / 1/step]
Adjust the clarity. This setting is only applied to the originals in SP 4921.
4930 1 Sharpness-Edge (Copy)
4931*
Sharpness-Solid [–2 to 2 / 0 / 1/step]
Adjust the clarity. This setting is only applied to the originals in SP 4921.
4931 1 Sharpness-Solid (Copy)
4932*
Sharpness-Low ID [–2 to 2 / 0 / 1/step]
Adjust the clarity. This setting is only applied to the originals in SP 4921.
4932 1 Sharpness- Low ID (Copy)
4941* White Line Erase [0 to 2 / 1 / 1/step]
SP Mode Tables
43
To Next Page
Loading...
