1100 Series DAD and MWD User Manual 175
Control Module Screens 10
Settings
Within the Settings you can change the DAD or MWD parameters and with a
different set of parameters available through the F1-5 keys. F7 key resets the
DAD or MWD to default values. F8 opens a window to turn on the lamps.
Use the m-key for the context sensitive menu. The Status command pulls up a
monitor screen displaying signals and spectra as programmed. Reset will load
the DAD or MWD default parameters. Balance brings the baseline back to set
offset.
To Next Page
Loading...
